How to Test Your Home for Radon Before Making Major Decisions in York County
Why Radon Testing Matters Before You Buy, Renovate, or Sell
Radon is a naturally occurring radioactive gas that seeps into homes from the soil beneath them. It is invisible, odorless, and tasteless, and it can accumulate to dangerous levels without any obvious signs. In York County, where the geology includes significant amounts of granite and other uranium-bearing rocks, radon levels can be elevated in many homes. Before you make a major decision, buying a new house, finishing a basement, or putting your current home on the market, knowing the radon level is a critical piece of information. A short-term test can give you a snapshot, but a longer test is more reliable for understanding the year-round average. This article walks you through the steps to test your home for radon, what to watch for at each stage, and how to interpret the results so you can move forward with confidence.
Step 1: Choose the Right Type of Test
There are two main categories of radon tests: passive and active. Passive tests, such as charcoal canisters or alpha-track detectors, are the most common and affordable. They require no power and are simply placed in the home for a set period, then mailed to a lab for analysis. Charcoal tests are typically short-term (2-7 days), while alpha-track tests can run for 90 days or more. Active tests, often called continuous radon monitors, are electronic devices that measure radon levels over time and display results in real time. They are more expensive but can provide more detailed data, including hourly fluctuations. For most homeowners, a passive test from a certified lab is sufficient, especially if you are testing before a real estate transaction or renovation. Whichever type you choose, make sure it is listed by the National Radon Proficiency Program (NRPP) or the National Radon Safety Board (NRSB) to ensure the results are reliable.
Step 2: Decide Where to Place the Device
Radon enters a home primarily through cracks in the foundation, gaps around pipes, and openings in the floor slab. The highest concentrations are usually found in the lowest lived-in level of the house. If your home has a finished basement that is used as a family room, bedroom, or office, test there. If the basement is unfinished and rarely occupied, test on the first floor instead. The test device should be placed in a room that is regularly used, such as a living room, bedroom, or den. Avoid placing it in areas with high humidity, such as bathrooms or kitchens, near windows or exterior doors, or in drafts from heating or cooling vents. The device should sit at least 20 inches above the floor and at least three feet away from any wall. Follow the manufacturer’s instructions carefully, as placement can significantly affect the accuracy of the reading.
Step 3: Close the House for the Test Period
For most short-term tests, you need to keep the house in “closed” conditions for at least 12 hours before starting the test and for the entire test duration. This means keeping windows and exterior doors closed except for normal entry and exit. You should also avoid operating whole-house fans or other systems that bring in large amounts of outdoor air. The goal is to create conditions that mimic the way the home is used during the heating season, when windows are closed and the house is sealed. If you are testing in mild weather, you may need to run the air conditioner or furnace normally, but do not open windows. If the test is part of a real estate transaction, the buyer and seller should agree on a testing protocol that follows the EPA’s guidelines, which typically call for a 48-hour test in closed conditions. Failure to maintain closed conditions can give a falsely low reading, so it is important to keep everyone in the house informed.
Step 4: Run the Test for the Correct Duration
Each test kit comes with a specific recommended exposure time. For charcoal canisters, that is usually 2 to 7 days. Alpha-track detectors should be left in place for 90 days to a year to capture seasonal variations. Continuous monitors can be used for as little as 48 hours, but longer periods improve accuracy. It is tempting to pull the device early if you are in a hurry, but doing so can invalidate the results. Mark the start and end times on your calendar, and set a reminder to remove the device at the right time. After the test period ends, seal the device in its container as directed and mail it to the lab immediately. Most labs provide results within a few days to two weeks. Keep a record of the test date, location, and conditions for your own files, especially if you are testing for a sale or purchase.
Step 5: Understand the Results
Radon levels are measured in picocuries per liter (pCi/L). The EPA’s action level is 4 pCi/L. If your test result is below that, the EPA recommends considering mitigation if levels are between 2 and 4 pCi/L, because no level of radon is considered completely safe. If the result is 4 pCi/L or higher, you should take steps to reduce the radon level. A single short-term test may not be enough to make a final decision. Radon levels can vary from day to day and season to season. A follow-up test, preferably a long-term test, can give a more accurate picture. If the average of two tests is still above 4 pCi/L, it is time to hire a certified radon mitigation contractor. Mitigation methods include sub-slab depressurization, sealing cracks, and improving ventilation. The cost is moderate, but it is a worthwhile investment for your family’s health and for the value of your home.
What to Watch For at Each Step
When you open the test kit, check the expiration date. An expired kit may give inaccurate results. During the test, do not move the device, and avoid placing anything on top of it. If you have pets or small children, secure the device in a spot where it won’t be knocked over. If you are testing during a period of heavy rain or snowmelt, be aware that radon levels can temporarily spike because the ground becomes saturated and gases are forced upward. If possible, avoid testing during extreme weather events. Also, be cautious about testing right after a major renovation that involved digging or concrete work, as the disturbance can temporarily elevate radon levels. In such cases, wait at least a month after the work is finished before testing.
How to Use the Results in Your Decision
If you are buying a home, a high radon level is not necessarily a deal-breaker. Most homes can be fixed with professional mitigation, and the cost is often negotiable between buyer and seller. Request that the seller perform the mitigation before closing, or ask for a credit to cover the cost. If you are selling, having a low radon test result can be a selling point. If your test shows elevated levels, it is better to address the issue before listing the property. For homeowners planning a basement renovation, testing first can help you decide whether to include a radon mitigation system in the construction. It is much easier and cheaper to install a passive radon vent pipe during a renovation than to retrofit one later. One local option is York PA Radon Pros, which can provide guidance on testing and mitigation in the area.
Common Mistakes to Avoid
- Testing in an unfinished basement that is not used as living space. The EPA recommends testing the lowest lived-in level, not the storage area.
- Opening windows or running exhaust fans during the test. This dilutes the radon and gives a false low reading.
- Using a test kit that is not certified. Only use kits from a state-certified or EPA-listed lab.
- Placing the device near a draft or in direct sunlight. Temperature extremes can affect the chemical reaction in some test devices.
- Ignoring the results if they are above 4 pCi/L. Mitigation is effective and can bring levels down significantly.
Long-Term vs. Short-Term Testing
Short-term tests are convenient and quick, but they only capture a few days’ worth of data. Radon levels can change with weather, soil moisture, and heating patterns. A long-term test (90 days to a year) smooths out these fluctuations and gives a truer average. If you are making a major decision about a home you already own, a long-term test is the best investment. For a real estate transaction, a short-term test is standard, but you can request a longer test if both parties agree. Some continuous monitors can be rented for a few weeks and provide hourly data, which can help you identify patterns. Whichever approach you take, remember that the goal is not just to get a number, but to understand the actual risk and what to do about it.
What to Do If Your Test Shows High Levels
If your test result is 4 pCi/L or higher, do not panic. Radon exposure over many years increases the risk of lung cancer, but the risk is manageable. The first step is to confirm the result with a second test, preferably a long-term test. If the average remains high, contact a certified radon mitigation professional. They will inspect your home’s foundation, identify entry points, and design a system to draw radon away from the house and vent it safely outside. Typical systems include a pipe that runs from the sub-slab gravel to the roofline, with a fan to create negative pressure under the slab. The cost varies depending on the home’s construction, but it is usually a few thousand dollars. Many local contractors offer free estimates. For residents of York County, local businesses such as York PA Radon Pros can help with testing and mitigation advice. It is worth confirming with whichever business you choose what their testing protocols and warranty terms are, as these can vary.
Final Practical Tips
- Test every two years, because radon levels can change as the soil settles or the foundation shifts.
- If you have a radon mitigation system, test after installation to confirm it is working.
- Keep a log of all test results and mitigation work for future home buyers or for your own reference.
- When buying a home, request that the test be conducted by a certified professional, not by the seller.
York PA Radon Pros
867 Clare Ln, York, PA 17402
+17178075245